Hampton Controls
Hampton Controls
Industrial Controls Divsion
Products by Category
Temperature & Process Controllers
Recorders
Flow Meters
Electric Process Heaters
Thermocouples & RTD's
Motor Drives & Motors
Hot Runner Mold Temperature Control Systems
Counters, Timers, Encoders & Power Supplies
Proximity Sensors
Relays & Contactors
Pushbuttons & Switches
Repair & Calibration
 
Electro Optics Division
 
Overview
Capabilities
 
Magnapak Series
 
  • Rated for 1/8 to 1 HP
  • One piece construction -- motor, controller and operator controls all assembled as one easy to install unit
  • On/Off switch, speed potentiometer, and line fuse mounted on operator's control panel
  • 150% maximum torque
  • ± 1% speed regulation
  • 90:1 full torque speed range
  • Permanent magnet motors
  • 120 or 240 VAC models with broad input voltage range
  • C-Face motor mount
  • Continuous duty rating
  • Totally enclosed, non-ventilated (TENV) and (TEFC) Totally enclosed, fan-cooled versions
  • Adjustments for maximum speed, IR compensation, and torque limit
  • Easy installation with no wiring between controller and motor
  • Factory selected matched components for best performance
  • Inexpensive installation, just bolt motor in place and wire to AC line
Magnapak ImageMagnapak Image

CONTINUOUS DUTY HP AT SET SPEED (RPM)
Maximum HP Input Voltage Motor Enclosure Output Torque (in-lb)
1750 1175 875 590 100        
0.125 0.083 0.0625 0.042 0.007 1/4 120 TENV 9
0.250 0.167 0.125 0.084 0.014 1/4 120 TENV 9
0.333 0.222 0.167 0.111 0.019 1/3 120 TENV 12
0.500 0.333 0.250 0.167 0.028 1/2 120 TEFC 18
0.750 0.500 0.375 0.250 0.042 3/4 120 TEFC 27
0.750 0.500 0.375 0.250 0.042 3/4 240 TEFC 27
1.000 0.667 0.500 0.333 0.057 1 240 TEFC 36

SELECTION
Description
Part Number
Non-Reversing With Operator Controls
1/4 HP, 120 VAC (TENV)
301-FMI
1/3 HP, 120 VAC (TENV)
302-FMI
1/2 HP, 120 VAC (TEFC)
403-FM1
3/4 HP, 120 VAC (TEFC)
404-FM1
3/4 HP, 240 VAC (TEFC)
411-FM1
1 HP, 240 VAC (TEFC)
412-FM1
Reversing with Braking and Operator Controls
1/4 HP, 120 VAC (TENV)
301-FM2
1/3 HP, 120 VAC (TENV)
302-FM2
1/2 HP, 120 VAC (TEFC)
403-FM2
3/4 HP, 120 VAC (TEFC)
404-FM2
3/4 HP, 240 VAC (TEFC)
411-FM2
1 HP, 240 VAC (TEFC)
412-FM2


Magnapak 56C TEFC Dimensions
Magnapak 56C TEFC Dimensions Diagram

 

Magnapak 56C TENV Dimensions

Magnapak 56C TENV Dimensions Diagram

 

Maganapak Part Numbering System

Maganapak Part Numbering System Diagram

 




Home | Overview | Capabilities | Contact Us | Site Map

Hampton Controls, Inc.
Wendel Road • P.O. Box 187
Wendel, PA 15691
Phone: (724) 861-0150 • Fax: (724) 861-0160
sales@hamptoncontrols.comwww.hamptoncontrols.com

Copyright © Hampton Controls, 2005. All Rights Reserved.